|
제품 상세 정보:
|
| Power supply: | AC 220V 50Hz | External dimensions of the device: | approximately W70×D60×H150cm |
|---|---|---|---|
| Display device: | liquid crystal display (20 digits, 4 lines) | Drop distance: | 50~75cm (adjustable) |
JIS T8050 ISO 13995 Dynamic Tearing Through Testing Machine Clothing Impact Resistance Tester
Introduction
This machine is mainly used to dynamically evaluate the impact resistance of materials such as protective clothing against the penetration and tearing actions of sharp tools. The sample is installed with its surface perpendicular to the falling sharp tool. The heavy hammer with the sharp tool is dropped from a certain height, and the tearing length of the sample caused by the impact energy of the heavy hammer is measured to evaluate the dynamic tear resistance of the tested material. The impact energy of the heavy hammer is determined by measuring the falling time of the heavy hammer with a photoelectric sensor and automatically calculating the falling speed before it hits the sample surface. The kinetic energy (J: joule) is then calculated using the mass of the heavy hammer.
Relevant standards:
JIS T-8050;ISO 13995
Technical Specification
|
Sample specification |
width 110mm, length 180~200mm |
|
Weight hammer mass |
1000±10g, 2000±10g (including auxiliary weights: 1000g) |
|
Drop distance |
50~75cm (adjustable) |
|
Drop device |
electromagnetic stone loading and unloading method (equipped with a safety brake to prevent dropping) |
|
Drop time display |
0~999msec |
|
Drop speed display |
0.0~9.9m/sec |
|
Blade specification |
front edge length (10mm), blade edge (0.2Rmm), blade angle (60 degrees) |
|
Blade material |
super steel (SK-3) |
|
Hardness |
Rockwell hardness (58HRC) |
|
Display device |
liquid crystal display (20 digits, 4 lines) |
|
External dimensions of the device |
approximately W70×D60×H150cm |
|
Power supply |
AC 220V 50Hz |
담당자: Ms. Kaitlyn Wang
전화 번호: 19376687282
팩스: 86-769-83078748
