| タイプ: | テストマシン | 正確さ: | --- |
|---|---|---|---|
| 応用: | 自動テスト、臨床検査、ラボテスト | カスタマイズされたサポート: | OEM、ODM、OBM |
| 力: | --- | 保護クラス: | IP56 |
| 電圧: | 220 v | 保証: | 1年 |
| 動作電源: | AC220V、5A | 曲がり角: | 25° |
| 音量: | (79×60×87)cm | 重さ: | 約68kg |
| ハイライト: | ISO 20345 waterproof shoe tester,dynamic waterproof testing instrument,SATRA TM230 shoe performance tester |
||
ISO 20345 EN 20344 Shoes Bending Water Proof Performance Tester SATRA TM230 Finished Shoes Dynamic Waterproof Testing Instrument
Instrument Introduction
This machine can be used to test the dynamic waterproof performance of various finished shoes. The shoes are placed on the testing machine, and a certain depth of water is poured into the water tank to come into contact with the shoes. The testing machine moves the front part of the shoe to bend at a certain angle and frequency, simulating the walking state of a person wearing the shoes in water for the test. The time it takes for water to leak from the outside of the shoe to the inside and the number of bends are used to measure the waterproof performance.
Reference Standards
Complies with SATRA TM230, EN 20344, EN ISO 20345, etc.
Accessories
1. 1 set of pressure pads and 1 wrench
2. 1 user manual, 1 calibration report, and 1 warranty card.
ISO 20345 EN 20344 Shoes Bending Water Proof Performance Tester SATRA TM230 Finished Shoes Dynamic Waterproof Testing Instrument
Technical Specification
|
Simultaneous Testing Capacity |
At the same time, 2 finished shoes can be tested |
|
Compressed Air Requirement |
More than 6 bar |
|
Testing Speed |
60 r/min |
|
Counter |
Two sets of counters count separately (0-99999999) |
|
Control System |
PLC control |
|
Curving Angle |
25° |
|
Volume |
(79x60x87) cm |
|
Weight |
Approximately 68 kg |
|
Power Supply |
AC 220V, 5A |
コンタクトパーソン: Kaitlyn Wang
電話番号: 19376687282
ファックス: 86-769-83078748
Japanese
