|
商品の詳細:
|
| 製品名: | 革の破裂強度試験機 | カスタマイズ: | 利用可能 |
|---|---|---|---|
| 保証: | 1年 | 音量: | 44×42×56 cm |
| 電源: | AC 220V±10％、50Hz、120W | 与圧の速度: | 170±15 ml/min |
ASTM D2210 ISO2759 Leather Rupture Strength Test Machine JIS L1004 L1018 Bursting Strength Tester
Introduction
The leather burst strength tester is an internationally recognized Mullen type instrument, widely applicable to packaging materials. It is mainly used to measure the burst strength of various cardboard and single or multi-layer corrugated cardboard. It can also be used to test the burst strength of non-paper materials such as silk and cotton fabric. Once the material is placed in, it will automatically detect, test, return to the oil pressure position automatically, calculate and store the test data, and print. The instrument displays the results in digital form and can automatically print the test results and process the data.
The fully automatic bursting strength tester adopts the principle of hydraulic incremental method. It uses advanced microcomputer detection control system and digital signal processing technology to measure the bursting strength of paperboard. It complies with ISO 2759 "Determination of Bursting Strength of Paperboard" and GB/T 1539 "Test Methods for Paperboard". It is suitable for various types of paperboard and leather, cloth leather and other bursting strength tests.
Experimental Principle
The fully automatic bursting strength tester is used to test the bursting strength value of carton and paperboard. It displays the pressure digitally and automatically retains the maximum bursting strength value when the sample breaks. Meanwhile, it can print the test results in a trend. The indication method of the bursting strength tester is digital, with a capacity of 0-100kg/cm2. The bursting strength tester is widely applicable to packaging materials, including general paper, corrugated paper, toilet paper, packaging paper, etc., as well as leather, fabric, packaging film, etc., and can effectively monitor product quality.
Meet the standards
JIS-L1004, L1018, L1031, K6328, P8131, P8112 and ASTM-D2210, TAPPIT403, ISO2759-2001, GB/T1539
Technical specifications
|
Automatic clamping and releasing device, sample holding force |
> 690 kPa (adjustable) |
|
Test the system's airtightness |
Pressure drop within 1 minute < 10% of Pmax |
|
Resolution |
1 kPa |
|
Discharge volume |
(0.02 - 0.3) m³/min |
|
Rated pressure |
(0.6 - 0.7) |
|
Test units |
Pa, kPa, kgf |
|
Weight |
Approximately 50kg |
|
Hydraulic oil |
Glycerol 85%, distilled water 15% |
|
Material of the retaining ring |
Stainless steel SUS 304# |
|
Upper ring diameter |
Φ 31.50mm |
|
Lower ring diameter |
Φ 31.50mm |
|
Volume |
44 × 42 × 56 cm |
|
Power Supply |
AC 220V ± 10%, 50Hz, 120W |
|
Bursting strength measurement range |
0 to 100 kgf |
|
Air pressure source |
min. 6kg/cm² (provided by customer) |
|
Pressurization speed |
170 ± 15 ml/min |
コンタクトパーソン: Ms. Kaitlyn Wang
電話番号: 19376687282
ファックス: 86-769-83078748
