The Application of Wire Abrasion Testing Machine
Equipment Introduction
The wire abrasion testing machine is used for the abrasion test of wire sheaths. The wire abrasion testing machine fixes one end of the wire and suspends a weight at the other end. It moves back and forth at a certain speed, number of times, and stroke to rub against sandpaper. The wire abrasion testing machine complies with the requirements of standards such as UL62, UL2556, and UL507.
Equipment Features
1. It adopts an aluminum profile frame, with a reasonable overall design, a solid structure, and stable operation that meets the testing requirements.
2. The test speed, number of times, etc. can all be adjusted and displayed. The operation is simple, convenient, and fast.
3. The roller can rotate, and the abrasion position can be changed. The abrasion medium can be replaced easily, featuring a humanized design.
Technical Parameters
|
Test Stations |
Three groups (simultaneous linkage testing) |
|
Test Times |
0-99,999,999 times (presettable and retains memory after power off) |
|
Test Speed |
5-60 times/min (adjustable by knob and digitally displayed) |
|
Abrasion Stroke |
160mm |
|
Hooked Weights |
Two 340g weights |
|
Friction Wheel Radius |
90mm |
|
Abrasion Medium |
500-mesh aluminum oxide sandpaper |
|
Machine Size |
Approximately 700×380×1150mm |
|
Operating Power |
AC220V, 50Hz |
コンタクトパーソン: Ms. Kaitlyn Wang
電話番号: 19376687282
ファックス: 86-769-83078748
Japanese
