China Small Meter

Powder Density Meter/solid Density Meter/colloid Density Meter

Measurement range:0-300.000g/cm3 (ZMD-1), 0-100.0000g/cm3 (ZMD-2)

Weighing range:0-300.000g (ZMD-1), 0-100.0000g (ZMD-2)

Measurement accuracy:1mg/cm3 (ZMD-1), 0.1mg/cm3 (ZMD-2)
ISO 2781 ISO 1183 Touch Screen Solid Densitometer

Model:XXF-32035S

Weighing Range:0.005-320g

Density Readability:0.001 g/cm3
SNB-T Series Touch Screen Rotary Viscometer Viscosimeter Viscosity Meter Rotary Viscosity Instrument

Display mode:5 inches color touch screen

Rotor speed:0.3/0.6/1.5/3/6/12/30/60 r/min (SNB-1T), 0.1/0.3/0.6/1.5/3/6/12/30/60 r/min (SNB-2T)

Measuring range:1~2,000,000 mPa.s (SNB-1T), 1~6,000,000 mPa.s (SNB-2T)
IEC 60598 IP3X Test Probe Test Rod High Precision Inspection Probe IEC 60529 Potable Testing Probe

Handle length:100mm

Handle diameter:10mm

Ball diameter:35mm
IEC 60529 IEC 60065 Inspection Probe Fingers Contact Protection Testing Machine Test Probe

Voltage:220 V

Protection Class:Ip56

Baffle diameter:50mm
Galvanized Layer Hammer Adhesion Testing Machine Zinc Coating Adhesion Hammering Tester

Hammer weight:210g±1g

Hammer material:45 steel

Hardness level:HS40 or above
IEC 60068 Spring Impact Hammer Calibrating Equipment Calibration Device Spring Impact Hammer Calibrator

Accuracy:0.01J

Repeat accuracy:±0.01J

Maximum range:0-2J
EN 60529 UL 1278 Standard Testing Finger Articulated Test Finger Standard Protection Level Testing Equipment

Type:Testing Machine

Protection Class:Ip56

Voltage:220 V
IEC 60335 125mm Standard Test Finger IEC 61032 Test Bending Finger Standard Bent Test Finger

Bent finger diameter:12mm

Bent finger length:80mm

Baffle plate diameter:125mm
Q61 Concrete Strength Tester,Ultrasonic Concrete Rebound Hammer

Sound time error:±0.1μs

Ultrasonic frequency:50KHz

Nominal kinetic energy:2.207J
IEC 60068 0.2J Spring Impact Hammer

Length:211mm

Weight:1250g

OD:50mm
0.7J Spring Impact Hammer test Device IEC60068

Length:211mm

Weight:1250g

Outer Diameter:50mm

Page 4 of 10|< << 1 2 3 4 5 6 7 8 9 10 >> >|

Small Meter

China Small Meter

Powder Density Meter/solid Density Meter/colloid Density Meter

ISO 2781 ISO 1183 Touch Screen Solid Densitometer

SNB-T Series Touch Screen Rotary Viscometer Viscosimeter Viscosity Meter Rotary Viscosity Instrument

IEC 60598 IP3X Test Probe Test Rod High Precision Inspection Probe IEC 60529 Potable Testing Probe

IEC 60529 IEC 60065 Inspection Probe Fingers Contact Protection Testing Machine Test Probe

Galvanized Layer Hammer Adhesion Testing Machine Zinc Coating Adhesion Hammering Tester

IEC 60068 Spring Impact Hammer Calibrating Equipment Calibration Device Spring Impact Hammer Calibrator

EN 60529 UL 1278 Standard Testing Finger Articulated Test Finger Standard Protection Level Testing Equipment

IEC 60335 125mm Standard Test Finger IEC 61032 Test Bending Finger Standard Bent Test Finger

Q61 Concrete Strength Tester,Ultrasonic Concrete Rebound Hammer

IEC 60068 0.2J Spring Impact Hammer

0.7J Spring Impact Hammer test Device IEC60068

Lab Test Machine

Contact Fatigue Wear Testing Equipment 5KW Tumble Test Machine

Fiber Fineness Analyzer Lab Test Machine Textile Fabric Fiber Fineness Diameter Tester

Fiber Tensile Lab Test Machine Pre Tensioned Filament Tensile Strength Test Machine

Petroleum Tester

Engine Fuel Actual Gel Tester 0.7Mpa Actual Colloid Tester

ASTM D5001 Aviation Turbine Fuel Lubricity Tester Ball On Cylinder Lubricity Evaluator

200W Petroleum Tester Low Temperature Type Automatic Flash Point Tester