Single wire and cable vertical combustion testing machine is suitable for measuring single plastic wire, control line, crosslinking, elevator, Marine, mining cable vertical combustion non-spread performance. The vertical combustion test of high self-extinguishing low smoke halogen-free flame retardant polyolefin insulation material and 105℃ low smoke halogen-free flame retardant olefin irradiated insulation material can also be done. The device is a single wire and cable fire resistance test equipment, the equipment has the advantages of high accuracy, automatic timing, automatic end of the test, easy operation and so on.
IEC60332 Single wire Vertical Combustion Tester Flammability Test Chamber For Plastic
Basic specifications:
1. Combustion box: the box size is 300mm wide x 1200x deep 450mm;
2, combustion burner: 1KW combustion nozzle (according to GB/T5169.14-2007/ IEC60695-11-2:2003 standard production), the blue flame core height is 50 ~ 60mm, the total flame height is 170 ~ 190mm.
3, gas: the use of high purity 95% technical grade propane gas (or gas instead)
4, sample installation:
A, sample length: 600±25mm;
B. Sample support: the distance between the lower edge of the upper support and the upper edge of the lower support of the two horizontal supports is 550mm;
5. Fire supply time: 0.1-999.9S continuous setting, the flame can continuously burn the sample within the set time;
6. Blowtorch installation position: The blue flame contact point is 475mm from the lower edge of the horizontal upper bracket, and the blowtorch is at a 45 degree Angle with the vertical axis of the sample
7, control function: manual or automatic options;
8, gas flow range: 100~1000mL/min;
9 Air flow range: 1~10L/min;
10, pressure gauge: 0~0.75kpa range adjustment
11, ignition mode: high pressure automatic ignition
¡Su mensaje debe tener entre 20 y 3.000 caracteres!
Spanish
