X-ray Fluorescence Spectrometer (XRF spectrometer) is a fast, non-destructive way to measure matter. The principle is to use the X-ray excitation source to irradiate the electroplating solution to be analyzed, and the inner electrons of the elements in the sample are knocked out, resulting in the transition of the outer electrons, and the characteristic X-rays of the elements will be emitted when the excited electrons return to the ground state. The Detector receives the characteristic X-ray signal of these elements, and the instrument software system converts it into the corresponding test intensity. The relationship between characteristic X-ray intensity and content is established with the reference material sample, that is, the calibration curve. After establishing calibration curves for different content ranges of elements, and then testing unknown samples, it is possible to quickly analyze the content in electroplating baths and other liquids.
The EDX9000E's advanced performance can also be extended to many more applications, including
Wear metal content analysis in lubricating oil in accordance with ASTMD7751/ASTM D6481/ASTM D5059 standards
Determine the total chlorine content of the oil for optimal desalination and corrosion control
Platinum, palladium and rhodium content in the primary catalyst
Analysis of total phosphorus, total chlorine, total arsenic, total sulfur and heavy metals in water
Analysis of elemental content in other liquids or powders
Characteristics and advantages
1, fast, a sample usually takes only 100 seconds to get the content
2, accurate, test results can reach laboratory level accuracy
3, no loss, XRF electroplating solution analyzer is a non-destructive analysis. It is completely non-destructive to the sample
4, the sample preparation is simple, only need to put the sample into the bath special sample cup, you can be tested on the machine
5, low use and maintenance costs, do not need to consume inert gases
6, simple operation, quick to get started, no need to repeat calibration every day, greatly improve the test efficiency
7. Wide linear dynamic range
8, not affected by the sample matrix, X-ray spectrum is independent of the chemical binding state of the sample, and with solid, powder, liquid and crystalline, amorphous and other things
There is also no direct linear relationship between qualitative states
আপনার বার্তাটি 20-3,000 টির মধ্যে হতে হবে!
Bengali
