DM6100 Model X-ray thickness gauge Thickness gauge utilizing X-ray technology
Description:
The DM6100 X-ray thickness gauge can be used for measuring the thickness of various plastic films, rubber, wood, cardboard, metal sheets, etc. in various industries. It is mainly used in the metal rolling industry to measure the thickness of products on the production line, such as steel strips, copper strips, aluminum strips, aluminum foils, etc. in a dynamic state. It can output the thickness signal to the AGC system to achieve closed-loop thickness adjustment. It has the advantages of non-contact with the measured object, continuous measurement, rapid measurement, and accurate measurement.
The DM6100 X-ray thickness gauge uses an X-ray tube as the X-ray source. Compared with the majority of X-ray thickness gauges currently available in China that use isotope radiation sources as X-ray sources, it has significant advantages. Firstly, it eliminates the complex approval procedures, high management costs, and especially the cost of repurchasing the radioactive source when the instrument is scrapped associated with the use of isotope radiation sources. Secondly, this thickness gauge adopts the unique source control technology developed by our company. Its X-ray source's energy and intensity can be continuously adjusted, ensuring that each thickness within the maximum measurement range achieves the best measurement accuracy. In contrast, isotope radiation sources usually have only one energy level and can only guarantee the best measurement accuracy for a certain thickness.
At present, the vast majority of X-ray thickness gauges produced in China use isotope radiation sources as X-ray sources. While X-ray thickness gauges using X-ray tubes as X-ray sources are mainly imported large-scale equipment, which are very expensive. Although a few domestic enterprises have started to produce them in recent years, their market share is limited and the prices are also high. The DM6100 type X-ray thickness gauge is a small-sized thickness gauge that uses a small X-ray tube as the X-ray source. Although its performance is slightly inferior to the imported products, the price is much lower than that of the imported products and also lower than those of domestic counterparts. It is only similar to the thickness gauges using isotope radiation sources as X-ray sources, but its performance is much higher than those using isotope radiation sources as X-ray sources.
The launch of the DM6100 X-ray thickness gauge enables small and medium-sized enterprises in China that previously needed thickness gauges to also use X-ray thickness gauges with X-ray tubes as the radiation source. This provides users with a new and more optimized option. By replacing X-ray thickness gauges with isotope radiation sources with the DM6100 X-ray thickness gauge, users will not only significantly improve product quality due to the enhanced performance, thereby bringing substantial economic benefits to users, but also improve the environmental protection level in the country by eliminating the use of isotope radiation sources, thus bringing great social benefits to the country.
We believe that the DM6100 type X-ray thickness gauge will undoubtedly replace the X-ray thickness gauges that use isotope radiation sources as their radiation sources in the near future, and will become the dominant player in the X-ray thickness gauge market.
Characteristics
It does not contain radioactive isotopes, has no pollution from three types of waste, and eliminates the troubles and costs for users.
2.Continuous non-contact measurements, when connected to the AGC system, enable closed-loop control of the thickness.
3.Large screen with Chinese display, cold cathode backlighting LCD, clear and bright characters.
4.High degree of integration, strong environmental adaptability, strong anti-interference ability and high reliability.
5. High measurement accuracy, fast response speed and good stability.
6.The operation is convenient and fast, with minimal maintenance and debugging workload.
7.It has self-diagnosis, error-operation alert, automatic calibration and compensation functions.
8.The shielding protection is excellent, ensuring compliance with radiation safety requirements.
9.The price function is relatively simple, which is suitable for the national conditions of our country.
Technical Parameters
|
Parameter
|
Specification
|
|
1. Measurement Range
|
• Steel: 0.1 mm – 4.0 mm
• Aluminum: 0.01 mm – 10.0 mm
|
|
2. Strip Speed
|
0 – 27 m/s
|
|
3. Resolution
|
0.001 mm
|
|
4. Measurement Accuracy
|
±0.2%
|
|
5. Response Time
|
100 ms (63% step response for 5% thickness variation)
|
|
6. Sampling Period
|
Selectable: 200 ms, 400 ms, 600 ms, 800 ms
|
|
7. Measurement Noise
|
0.12%
|
|
8. Repeatability
|
0.2%
|
|
9. Drift
|
• Long-term drift: <±0.24% per 8 hours
• Short-term drift: <±0.2% per hour
|
|
10. Warm-up Time
|
1 hour after X-ray source activation
|
|
11. Auto-calibration Time
|
≤20 minutes
|
|
12. Material Compensation
|
• Range: 0–15%
• Alternative: Multi-alloy calibration curves
|
|
13. Operating Conditions
|
• Temperature: 0–40°C
• Humidity: ≤95% RH (at 30°C)
• Power: 220V±20V, 50Hz
|
|
14. Power Consumption
|
≤250 W
|
|
15. Dimensions & Weight
|
• Control Console: 470mm(W)×365mm(D)×160mm(H), 15kg
• C-Frame: 673mm(W)×579mm(D)×189mm(H), 35kg
|
Ваше сообщение должно содержать от 20 до 3000 символов!
