|
تفاصيل المنتج:
|
| يكتب: | آلة الاختبار | فئة الدقة: | دقة عالية |
|---|---|---|---|
| دقة: | ---- | طلب: | اختبار السيارات ، الاختبار المختبري ، الاختبار المعملي |
| دعم مخصص: | تصنيع المعدات الأصلية، أوديإم، OBM | قوة: | 80 واط |
| فئة الحماية: | IP56 | الجهد االكهربى: | المعدات الكهربائية 220 فولت |
| ضمان: | 1 سنة | أبعاد: | 275 مم * 470 مم * 175 مم |
| وزن: | 7.5 كجم | عرض: | شاشة LCD |
| مزود الطاقة: | 100 ~ 240 فولت تيار متردد، 80 وات | ||
| إبراز: | portable UV flue gas analyzer,laboratory flue gas tester,UV flue gas concentration machine,laboratory flue gas tester,UV flue gas concentration machine |
||
Portable Ultraviolet Flue Gas Analyzer Laboratory Flue Gas Volume Concentrations Test Machine UV Flue Gas Tester
Product Introduction
The portable ultraviolet flue gas analyzer is based on ultraviolet differential absorption spectroscopy, non-dispersive infrared technology, and long-life electrochemical sensing technology. It can simultaneously measure the volume concentrations of SO2, NOx, CO, CO2, O2, and HC in flue gas. It can be optionally equipped with an integrated sampling and heating device and a portable pre-treatment device, which does not alter the composition of the measured gas, meeting the detection requirements of analytical instruments. It is a high-performance portable product specifically designed for environmental monitoring, energy-saving monitoring, energy efficiency testing, and environmental science research.
Product Features
Based on ultraviolet differential absorption spectroscopy technology to measure SO2/NO, using the DOAS algorithm, it is unaffected by moisture and dust, and there is no cross-interference between the measured gases, meeting the requirements for ultra-low emission monitoring.
Using non-dispersive infrared dual-beam gas analysis technology and long-life electrochemical sensing technology to measure CO/CO2/O2, ensuring no cross-interference between the measured gases, high measurement accuracy, and long sensor lifespan.
The analyzer can be optionally equipped with an integrated sampling and heating device and a portable pre-treatment device, meeting the requirements for flue gas sampling and instrument analysis after filtration, dust removal, condensation, and flow control, without altering the composition of the measured gases in the flue gas.
Application Areas
Environmental monitoring and enforcement, boiler and kiln efficiency testing, checking burner operating conditions, checking equipment leaks
Portable Ultraviolet Flue Gas Analyzer Laboratory Flue Gas Volume Concentrations Test Machine UV Flue Gas Tester
Technical Specification
|
Measured Components |
SO2,NO,CO,CO2,O2 |
|
Measurement Principle |
SO2/NO/CO/CO2:UV-DOAS ; O2:ECD |
|
Measurement Range
|
SO2/NO:(0~100/200/500)mg/m3 |
|
Linearity Error |
±2%F.S. |
|
Repeatability |
≤2% |
|
Response Time |
T90<15s |
|
Warm-up Time |
30min |
|
Stability |
≤2%F.S./24h |
|
Sample Flow Rate |
(0.7~1.2)L/min |
|
Dimensions |
275mm*470mm*175mm |
|
Weight |
7.5kg |
|
Electrical Parameters |
|
|
Power Supply |
100~240VAC,80W |
|
Display |
LCD display |
اتصل شخص: Kaitlyn Wang
الهاتف :: 19376687282
الفاكس: 86-769-83078748
Arabic
